Fiber proof testers are created to use a set load to a fusion-spliced optical Fiber in order to test the effectiveness of the spliced Fiber. Our Fiber proof testers can be found in both linear and rotary styles, for both evidence and tension screening. Fiber evidence testers are available for single setting, multimode, and polarization-maintaining fibers. Choose from dedicated, standalone systems or Yarn Binder which can be also capable of stripping, cleaning, cleaving, splicing, and/or recoating.
Fiber Recoaters with Proof Testers offer simple, incorporated answers to recoat and test fusion-spliced materials. The Fiber recoating process restores the barrier coating to a removed Fiber, offering much more versatility compared to a heat-shrink protection sleeve, enabling that it is handled and coiled without damaging the combination-spliced area. The incorporated linear or rotary evidence tester enables users to instantly check a recoated Fiber using a pre-decided weight and figure out the long-phrase reliability of the Fiber. Due to their capacity to recover a fusion-spliced Fiber to close to original condition, these techniques are perfect for programs such as undersea visual Fiber cables, submarine communication cabling, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
The procedure starts with the combination-spliced portion of Fiber becoming positioned in the midst of the mold set up (see image towards the right). Once set in position, inserts in the Fiber blocks secure the spliced Fiber in place. Recoat material is pumped into the cavity and then Ultra violet-cured. The recoated Fiber can then be analyzed by pulling on it up to a pre-decided load.
Recoater and Mold Set up Options – Recoaters can be purchased with either an automatic or manual mold set up. The automated mold set up features pneumatic control over the mold plates and is also enhanced for top-volume Cable Air Wiper. Handbook mold assemblies, on the other hand, use hinged mold plates that provide more versatility and are perfect for reduced-volume production or RAndD programs. An automatic or manual volumetric dispensing water pump and injection product is utilized to inject the recoat material in to the mold cavity.
The PTR208 automated recoater comes standard with a mold assembly for Ø430 µm coated materials; For your handbook recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up comes individually in order that customers can pick the right mold coating diameter for his or her program. Custom mold covering sizes are available approximately Ø900 µm. Pre-setting up the mold assembly on the factory can also be readily available. Get in touch with Tech Support for more information on custom molds or manufacturer set up.
We provide both high-index (Product # AB950200) and reduced-index (Item # PC373) recoat components to be used during these recoaters. Recoaters with handbook shot pumping systems (Product #s PTR206B and PTR307B) are suitable for both varieties of recoat material; all other recoaters are appropriate for our prime-directory materials only. Our handbook recoaters having an automated injection system (Item #s PTR206 and PTR307) can be personalized to work with the low- and high-index recoat material; please get in touch with Technology Assistance for more information.
Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an integrated linear proof tester, which takes the Fiber as much as a predetermined load (20 N) and then produces it. The linear proof tester uses the same Fiber keeping obstructs because the recoater and therefore the Fiber fails to need to be relocated just before testing. The PTR307 and PTR307B Fiber Recoaters come with an incorporated rotary proof tester, which can perform both evidence and tension tests (?89 N). One set of proof check grips is provided; replacement proof check grips can be purchased below in packs of 10. Every testing process is completely programmable using the included handset or tablet pc control, enabling the user to choose guidelines such fdrofe the burden, the pace in which the stress is used, and also the hold time.
Inserts for Fiber Keeping Blocks – In addition to the previously mentioned, we provide you with a number of Secondary Coating Line to use inside the Fiber keeping obstructs in the recoaters in order to support a wide range of Fiber coating diameters. For recoaters using a rotary proof tester, the inserts are compatible with Fiber coating diameters within a range from 125 µm to 900 µm. For recoaters using a linear evidence tester, the inserts cover a range for Fiber coatings from Ø250 µm to Ø900 µm.